看燈蕊看診!!??

看燈蕊看診!!??,這樣說也許有點誇張,不過內容大多有經過思考與驗證,如有錯誤,也請大家指教。


表現:燈蕊外無外火,亮度正常
成因:空燃比正確,量正確,燃燒溫度也正常的燃燒狀況

解釋:
所有經過混合過的油氣,因為已經達到燃燒條件(1.油氣與空氣的比例 2.溫度),將會在燈蕊內燃燒完畢,燃燒後的廢氣通過燈蕊,應已是 CO2 與 水蒸氣,肉眼應不可視
Continue reading “看燈蕊看診!!??”

When the pressure is low, the fire is extinguished, but will there be oil out. Is this normal?


Today, a friend who bought KVL-1 asked me a question, will cause him to use the doubts, the reason should be Coleman lamp is used to stain the oil and kerosene lamp is different from the volatile oil, plus a closed oil The design of the valve, the flameout procedure is also different, so it may be so different, so the result is different

Q: When the pressure is low, the fire is extinguished, but will there be oil spouting. Is this normal? The previous vaporized lamp does not have this problem.

A :: there will be oil spewing, there is pressure, my old TILLEY lights have the same problem, go out, oil and gas will still be ejected, do not know before you gasification lamp is TILLEY light?

Q :: No, it is Coleman’s Polaris, used to stain the oil.

A :: I think the lights go out, just represent it now state, not suitable for his self-loop to light himself, does not mean that his pressure has been completely released.

Q :: So if you want to turn off the fire is a direct pressure?

A :: kerosene vaporization lamp is the pressure is wrong, KiteLamp and TILLEY lamp structure of the same principle, the pressure off flame, do not have to lock the gas rod, through the needle valve do not have to close.

A :: To stain the oil out of the program, off the valve, to confirm no fire, pressure relief.