原廠 TILLEY 常有油管無孔,或是通針無法突出的困擾 , 以下的步驟可以試試, 幫油管先通通樂。
當年，那個還很少人投入 TILLEY 零件及配件的時代，新竹有位燈友依照 TILLEY 型錄上的照片，一筆一劃描繪出來，並且與對岸的燈罩廠商，來回不知多少次，外型修修改改，微調材料與尺寸，又必須與廠商調整運送包裝等事宜，在那個沒有人投入 TILLEY 的時代，實屬難得。
Enamel will crack or deformation, the main reason is a single material, or a variety of bonding materials, after heating , the cooling rate of contraction is not the same, resulting in mutual pull, resulting in stress. With the use of what oil be no relationship, the main reason is to shrink the cooling rate.
Enamel , I am not an expert, but there must be different type some better, some may be worse. The same product production, different times will use different type of enamel, or the same period of the product, the same type, different time production, because the process parameters are different, may cause the same enamel products, the durability of future will different. So it is strange to lead the problem into it worth to use kerosene with enamel.
At present, there are a lot of lamp’s cap is enamel, such as, 200P, 1200, M320, 246, 551, 981, 991, 1020. 1321, etc., are working with kerosene system, if the assertions are can not use kerosene, can only say that only ignorance will say such remarks.
And if the kerosene in the europe is better than Taiwan , then the lamp we bought from foreign , the lamp cap enamel should not split, in fact , it is also cracked sometimes , Does someone specifically come abroad to buy kerosene in Taiwan? So the kerosene I think will not be the main reason.
Another enamel pot or enamel kettle also the design can be used with the fire,the most important thing is not into cold water , it will let enamel split, so smart like you, do not let Ignorant lead you to experience the use of vaporized lamps.
2015 / March
Optimus 111 series stove, in the whole vaporization stove , not the largest, smallest, most unique, but has always been a right place , not too large, the oil tank is not too small, stability also, has been a good practical oven.
But the only defect is the rack is weak , the original rack material should made by general carbon steel with coating , should have been hardened, can loading , but after a fire a roast, it become softer . strength going down.and the distance between the two rack is too large, can not put a small kettle, it seems unstable, dangerous increase. That is why we decide to develop it .
That night , many people coming to discuss , after several times the appearance of the design discussion, the rack was born , although there are some shortcomings can be improved, the utilization rate of material is not very economical, but the production process is simple, resistance to weight, has been The advantages of this design.